一类压缩型映射的不动点定理

在完备的度量空间中,讨论了一类新型的非线性压缩映射ρ(Tx,Ty)≤a(ρ(x,y))ρ(x,Tx)+b(ρ(x,y))ρ(y,Ty)+c(ρ(x,y))ρ(x,y)通过构造迭代序列,指出该映射的不动点的存在性和唯一性,并给出相应的误差估计式,拓展和改进了有关文献的范围.     

Enhancing signal-to-noise ratio and resolution in low-field NMR relaxation measurements using post-acquisition digital filters

The traditional way to enhance signal-to-noise ratio (SNR) of nuclear magnetic resonance (NMR) signals is to increase the number of scans. However, this procedure increases the measuring time that can be prohibitive for some applications. Therefore, we have tested the use of several post-acquisition digital filters to enhance SNR up to one order of magnitude in time domain NMR (TD-NMR) relaxation measurements. The procedures were studied using continuous wave free precession (CWFP-T₁) signals, acquired with very low flip angles that contain six times more noise than the Carr–Purcell–Meiboom–Gill (CPMG) signal of the same sample and experimental time. Linear (LI) and logarithmic (LO) data compression, low-pass infinity impulse response (LP), Savitzky–Golay (SG), and wavelet transform (WA) post-acquisition filters enhanced the SNR of the CWFP-T₁ signals by at least six times. The best filters were LO, SG, and WA that have high enhancement in SNR without significant distortions in the ILT relaxation distribution data. Therefore, it was demonstrated that these post-acquisition digital filters could be a useful way to denoise CWFP-T₁, as well as CPMG noisy signals, and consequently reducing the experimental time. It was also demonstrated that filtered CWFP-T₁ method has the potential to be a rapid and nondestructive method to measure fat content in beef and certainly in other meat samples.     

组合式十字形钢管混凝土柱偏压力学性能试验研究

设计了一种由槽钢和方形钢管拼焊形成的组合式十字形钢管混凝土柱,将其灵活地布置在框架结构的中节点,可使柱肢与填充墙等厚,有效地提高建筑使用面积。共制作了6根组合式十字形钢管混凝土柱试件,考虑了偏心距和长细比两种变化参数。通过对其进行偏心受压试验研究,考察了试件的破坏形态和荷载-挠度曲线,并分析了其在不同偏心距和长细比下的荷载-应变曲线发展规律。结果表明:组合式十字形钢管混凝土柱中钢管和槽钢对混凝土的约束作用强,表现为较高的延性系数;偏心距或长细比越大,试件的极限承载力及弹性刚度越小,且偏心距越大延性越好,长细比对延性影响不显著;在受拉侧纵向应变基本上符合平截面假定,在受压侧纵向应变不符合平截面假定。     

Stress memory polymers

Like shape memory polymers, a novel phenomenon of stress memory was shown in which the stress of a material can respond to an external stimulus. This concept was further enlightened by a switch‐spring‐frame model that would eliminate the limitation of existing models which overlooked the stimulus responsive nature of such polymers. The discovery being reported in this article was stemmed from a real case study into shape memory polymer fibers in compression stocking for varicose veins. The breakthrough of stress memory enabled researchers to develop applications needing stimuli‐responsive forces, which can broaden the horizon of such smart polymers in emerging smart products in many multidisciplinary fields such as sensors, stress garments, and massage devices, electronic skins, and artificial muscles. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 893–898     

石英砂粒径对水合物沉积物力学性质的影响

利用自主研发的水合物沉积物原位合成与力学性质测试的高压低温三轴仪,通过多级加荷的试验方法,以不同粒径的砂粒作为沉积物骨架进行三轴压缩试验,得到了剪切过程的应力-应变关系曲线,以及不同粒径尺寸沉积物的强度,还有剪切过程中的体积变化关系。结果表明:含水合物沉积物强度随着沉积物粒径尺寸的增大而增强;在降压剪切过程中,所有粒径的水合物沉积物式样均有明显的剪缩现象。     

Janus Face All-cis 1,2,4,5-tetrakis(trifluoromethyl)- and All-cis 1,2,3,4,5,6-hexakis(trifluoromethyl)- Cyclohexanes

We report the synthesis of all-cis 1,2,4,5-tetrakis (trifluoromethyl)- and all-cis 1,2,3,4,5,6-hexakis (trifluoromethyl)- cyclohexanes by direct hydrogenation of precursor tetrakis- or hexakis- (trifluoromethyl)benzenes. The resultant cyclohexanes have a stereochemistry such that all the CF₃ groups are on the same face of the cyclohexyl ring. All-cis 1,2,3,4,5,6-hexakis(trifluoromethyl)cyclohexane is the most sterically demanding of the all-cis hexakis substituted cyclohexanes prepared to date, with a barrier (ΔG) to ring inversion calculated at 27 kcal mol⁻¹. The X-ray structure of all-cis 1,2,3,4,5,6-hexakis(trifluoromethyl)cyclohexane displays a flattened chair conformation and the electrostatic profile of this compound reveals a large diffuse negative density on the fluorine face and a focused positive density on the hydrogen face. The electropositive hydrogen face can co-ordinate chloride (K≈10³) and to a lesser extent fluoride and iodide ions. Dehydrofluorination promoted decomposition occurs with fluoride ion acting as a base.     

Micro-CT参数对骨质疏松性椎体压缩性骨折术后复发的预测价值

本研究探讨Micro-CT参数对骨质疏松性椎体压缩性骨折(OVCF)患者术后复发的预测价值。选取OVCF患者127例,根据术后6个月骨折复发情况分为复发组(n=41)与未复发组(n=86)。患者均接受Micro-CT检查,对比两组Micro-CT参数,即骨体积分数(BV/TV)、骨小梁厚度(Tb.Th)、骨小梁间隙(Tb.Sp)、结构模型指数(SMI),以及骨密度(BMD)、骨矿含量(BMC),分析各参数与BMD、BMC及术后复发相关性,并评价各参数对术后复发的预测价值。结果显示,复发组骨体积分数(BV/TV)、骨小梁厚度(Tb.Th)低于未复发组,骨小梁间隙(Tb.Sp)、结构模型指数(SMI)高于未复发组(P<0.05);BV/TV、Tb.Th与骨密度(BMD)、骨矿含量(BMC)呈正相关,Tb.Sp、SMI与BMD、BMC呈负相关(P<0.05);将年龄、BMD、BMC等其他因素控制后,BV/TV、Tb.Sp、Tb.Th、SMI与OVCF术后骨折复发显著相关(P<0.05);BV/TV、Tb.Sp、Tb.Th、SMI联合预测OVCF术后骨折复发的曲线下面积(AUC)最大,为0.888(P<0.05)。提示Micro-CT参数在OVCF患者中呈异常表达,采用Micro-CT检查可为临床预测OVCF术后骨折复发提供科学指导。     

Ni(OH)2修饰的三聚氰胺泡沫用于可压缩超级电容器电极

通过化学镀和电化学镀的方法制备了一种Ni(OH)₂电化学活性材料修饰三聚氰胺泡沫(MF)可压缩骨架的超级电容器电极材料MF/Ni(OH)₂。MF/Ni(OH)₂可压缩电极材料表现出最佳的电容性能,例如循环稳定性(即使在40 mA/cm^-3的电流密度下经过2000次充放电循环后,可压缩电极仍能保持90.63%的初始电容)和可压缩稳定性(即使在压缩率为50%时,仍具有97.88%的电容保持率)。层状可压缩超级电容器由MF/Ni(OH)₂弹性材料作为阳极,镍/碳(Ni/C)为阴极以及实验室中常用的滤纸作隔膜材料组成。这种超级电容器装置在不同的压缩下表现出良好的电化学性能和优异的压缩稳定性。最后,使用可压缩的超级电容器来点亮LED灯,以展示其在柔性电子设备中的应用。这些优化的电化学和机械性能表明MF/Ni(OH)₂可作为可压缩超级电容器的应用中的候选电极。